GenTex Strobe Smoke Detector 710-9CS - Hard Wired

Why you need the GENTEX Smoke Alarm with visual signal.  Not unlike the warning systems in businesses and hospitals, this detector is both very loud and very bright, sure to capture your attention while asleep or awake.  It’s a photoelectric smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This Strobe Smoke Detector - Hard Wired Version is hard-wired and easily installed by your favorite electrician.
 

• Photoelectric sensing: more accurate, dependable and less prone to false alarms such as when cooking or smoking.
• Hard wired: consult an electrician for installation.
• 177 candela rated strobe.
• Solid state 90dB horn.
• Choice of continuous or T3 (3 blasts, pause, 3 blasts...) sound pattern.
• Full function 3 position test switch.
• Battery backup w/ audible low battery chirp: Alarm only.
• Flashes 60 times per minute.
• Quick-disconnect wiring harness.
• Tandem connection of up to 6 units.
• Meets state, federal, and ADA requirements.
• Choose either wall or ceiling mount: mounting hardware for standard junction boxes.
• UL Listed. 

• 177 candela rating: UL 1971.
• 90 dB non-latching solid stste horn.
• Nominal 2.5% sensitivity.
• 5:1 signal-to-noise ratio.
• Pulsing LED chamber.
• Form "C" auxiliary relay contacts for remote annunciation.
• Temporal 3 Evacuation Sounding Device.

OPTIONS:

Remote Strobe Signaler-Connect up to 2 Remote Strobe Signalers per each detector. These are intended for indoor use and require an electrician for installation

1 year limited